SONY LMD4251TD - 42-inch High Grade 3D LCD Monitor |
ID : 139 |
SONY LMD-4251TD
Don't Pay Too Much !!
**Discontinued** Ask us to search for a quality used one or similar..
Delivers outstandingly crisp, high brightness and high contrast images.
The LMD-4251TD uses precisely manufactured RGB colour filters, allowing the reproduction of colours with stunning depth and saturation to create highly natural images.
The LMD-4251TD adopts a 3D micro polarizer filter attached to the LCD panel, and is supplied with circular-polarizer glasses. In this system, the right and left signals are sorted into odd lines and even lines respectively. The right and left images delivered from the LCD panel are circular polarized in different directions through the micro-polarizer filter and the patterned retarder. Each right and left image can then be viewed by the corresponding right and left circular-polarizer filter glass.
Sony BKM-30G circular-polarizer glasses are designed for the 3D production operator’s convenience, and optimized for both LMD 3D monitors.
When a half-mirror type of rig is used, either the left or right signal may be reversed horizontally. The Flip H function turns the reversed image to the normal view. This is helpful because the user can refer directly to the rig camera, achieving a simple and cost-saving system.
Either the left or right signal phase (or both phases) of a 3D image can be shifted horizontally. In this way, users can simulate the amount of 3D image parallax, and can judge whether the camera rig should be adjusted on location or whether it would be better to adjust the parallax later during the post-production process.
This function helps users to perceive the subtle difference of depth between different objects placed on the 3D screen surface.
Left and right input signals are displayed in a grid pattern on screen – divided into 9 blocks vertically and 16 blocks horizontally. By comparing adjacent images, users can recognise a difference in brightness and colour setting of the left and right images, and thus easily adjust the camera’s white balance and iris settings.
Left and right signals can be swapped in a moment without inserting black frames, simply by manually pushing a function key. This instant-swap capability enables users to compare whole images and check for any sense of incongruity or for unnatural images.
Channel-assign information about the payload ID data of input signals is displayed on the menu screen. This tells users how the left and right channels are assigned in the menu.
Colour temperatures of 9300k,6500k, or a user preset value can be selected.
ChromaTRU technology ensures close CRT colour accuracy and gamma matching throughout the product’s life and delivers consistent colour temperature across the entire greyscale range. Both control characteristics also assure extremely tight colour matching between different model samples. Three settings are available to simulate EBU, SMPTE and ITU-709 colour reproduction.
The LMD-4251TD employs software based white balance calibration function, which is called LMD_AutoWhiteBalance. Combined with a PC and commercially available calibration tool - X-Rite i1Pro - this function enables precise and quick adjustment of the monitor’s white balance.
Delivers smooth colour and greyscale transitions for high quality video production.
The LMD-4251TD has a 3G SDI input capability. On Sony's montiors, the 3G SDI interface is compliant with the SMPTE 425 standard, transmitting up to 4:2:2/10bit 1080/60P video data using one SDI cable. 3D left and right signals can be handled through a single HD-SDI cable with a 3Gbs data rate.
LMD-4251TD can accept almost any SD or HD video format, both analogue and digital. Includes NTSC, PAL, component, RGB, Y/C, 480/60i, 575/50i, 480/60p, 576/50p, 1080/50i, 1080/60i, 1080/50p, 1080/60p, 720/50p, 720/60p, 1080/24psf, 1080/25psf, 1080/24p, 1080/25p, 1080/30p and PC signals from VGA to Full-HD.
The monitor can accept up to two optional video boards for additional video analogue or digital inputs (HD/SD SDI). Note that the new LMD-4251TD is compatible with current decoder boards. For the variety of 3D display functions, the BKM-250TG is mandatory.
The LMD-4251TD monitor is factory preset to accept 32 typical computer input signal frequencies.
Over-scan and Normal-scan as well as full scan is available, and aspect ratio can be switched between 16:9 and 4:3.
English, French, Spanish, German, Italian, Japanese and Chinese.
The LMD-4251TD monitor can display various area markers, including a centre marker, aspect markers, and a safety zone marker. These flexible marker controls, together with the choice of many different aspect markers, make the LMD-4251TD monitor extremely convenient display devices for a variety of shooting scenarios - from standard video acquisition to digital cinematography.
The LMD-4251TD comes equipped with a tally lamp that can be lit via a parallel remote connector. The status of the signal displayed on the monitor can be identified by the tally colour - red, green, or amber.
The image size can be automatically adjusted to its optimal setting with the one-touch APA key
Three connection methods are available -, parallel 8-pin, serial RJ45 Ethernet and serial RS232C links. The parallel connection allows up to 38 functions to be remotely controlled.
Via the serial RJ45 Ethernet connector using the BKM-16R control unit.
The LMD-4251TD is equipped with stereo speakers. Up to 16 embedded digital audio channels can be decoded and routed to the speakers. Analogue audio inputs are also catered for.
The key lighting contributes to the elegant design and enhances user functionality. And to increase flexibility, the lighting can be switched off to eliminate any visual disturbance when multiple displays are employed for tiling purposes.
A key-inhibit switch prevents inadvertent operation from the control panel.
Table, wall or ceiling mounting